• 上一篇：NSHTOEU 0.6/1kV LHD Cables
• 下一篇：NSSHCGEOEU 0.6/1kV Coal Cutter Cable (Low Tensile Stress)

NSSHCGEOEU 0.6/1kV Coal Cutter Cable (High Tensile Stress)

Applications

These cables are used for the connection of mobile machines under extremelyhigh mechanical loads, predominantly in miningsituations, e.g. for coal-cutting machines, also can beoperated via guide pulleys (cable cars) or used as areeling cable (LHD), suitable for extreme bending loads, high tensile stress,and impact and crushing loads.

Standards

VDE 0250 Part 812

Construction

Conductors: Flexible stranded tinned copper conductor.
Insulation: Heatresistant3GI3 rubber based on EPR.
Outer Conductor Layer: Easy strippable outer conductive layer.
Pilot Cores:Copper and steel conductor capable ofexpansion and compression with 3GI3 EPRrubber insulation.
Monitoring Conductor: Copper and steel conductorcapable of expansion and compression covert with semiconductive rubber compound.
InnerSheath: Rubber type GM1b.
Armour/Earth Conductor:Concentric earth conductor as tensile-stress-resistant braided armour of combined copper-steel wires.
Outer Sheath: Rubber type 5GM5, abrasion and tear resistant, oil resistant and flame retardant.

Dimensions and Weight

Number of Cores×Nominal Cross Section	Minimium Overall Diameter	Maximum Overall Diameter	Nominal Weight
No.×mm²	mm	mm	kg/km
3×16/16KON+2ST+UEL	38.5	41.5	2430
3×25/16KON+2ST+UEL	41.0	44.5	3050
3×35/16KON+2ST+UEL	44.5	48.0	3620
3×50/25KON+2ST+UEL	50.0	54.0	4810
3×70/35KON+2ST+UEL	54.5	58.5	5890
3×95/50KON+2ST+UEL	62.5	66.5	7800
3×35/16KON+3ST+3UEL	44.5	48.0	3860
3×50/25KON+3ST+3UEL	50.0	54.0	5050
3×70/35KON+3ST+3UEL	54.5	58.5	6000
3×95/50KON+3ST+3UEL	62.5	66.5	8050
3×120/70KON+3ST+3UEL	67.5	72.0	9380
3×150/70KON+3ST+3UEL	74.5	79.0	11120